About this item This fits your . Make sure this fits by entering your model number. 【Wireless HDMI 1Transmitter and 4 Receiver】 TreasLin Wireless HDMI Transmitter and Receiver support 1 TX up to 4 RXs Max, 1TX to 1RX (up to 200m under a barrier-free environment without interference), 1TX to 2RX(60m), 1TX to 3RX(40m), 1TX to 4RX(30m) ; works with most HDMI-equipped devices, including blu-ray players, set-top boxes, AV receivers, cable/satellite boxes, and computer systems. 【Infrared remote control, plug-and-play】 Support 20-60KHZ infrared emission, implant infrared signals into wireless signals, and remotely control reachable devices (such as TVs, projectors, etc.) in the bedroom. Plug and play, the computer does not need to install drivers. Just connect this wireless transmitter to receive! Reduce the trouble and cost of installing cables and set-top boxes 【Built-in 5.8G High Speed Wireless Transmission Signal】We uses the5.8G wireless high speed transmission signal,get faster transmission speed and stronger anti-interference ability.The use of external dual-gain antenna can be transmitted over long distance, the distance of the open transmission can reach 196ft.Note:A delay of less than 100ms seconds might occur due to data compression- Not recommended using for PC gaming. 【1080P@60HZ Full HD Transmission】1080P high-definition picture quality, support 1080P@60Hz high-definition resolution, support 60 times per second picture update frequency, clear and natural playback, smooth and clear picture 【Pairing Method(Pairing video is available for reference)】Step 1:Connect HD cable to TX input and RX output after 25s from the time of being electrified, wait for 10s after unplug, then make it be electrified Step 2：connect the TX with RX ,and re-plug the power adapter. when you see the IP address and WIFI signal， device are pairing succeeded