AW-TH330A Wireless (WIFI) Temperature & Humidity Controller for Curing Fridge & High RH This AW-TH330A plug-n-play temperature and humidity controller with Wi-Fi can be used for sausage curing, green houses, incubator and other similar applications, controlling both temperature (heating OR cooling) and humidity (humidifying OR dehumidifying) at the same time. You only need to plug in the power cord plugs from your heater/cooler and/or humidifier/dehumidifier directly to the outlets on the controller. The controller has a two-line LED display, two output sockets, one sensor module and one input power cord. The top displays the measured temperature value (either in Celsius or Fahrenheit), and the bottom shows the measured humidity value (RH%). The left output socket connects to the heating/cooling devices while the right output socket is for a humidifier/dehumidifier. The sensor module contains both temperature and humidity sensors (2-in-1 sensor). This controller can be operated via your smartphone through the Wi-Fi connection. The app based control feature gives a sense that your controller is always in your pocket. And now, it's easier than ever to control all the features remotely and directly on the AuberWIFI app from your smart device. If you need to control both humidifier and dehumidifier at same time, you can either use HD330-W dual-channel humidity controller, or use two sets of AW-TH330A. If you need to control both heater and cooler at same time, you can either use TD120 dual-channel temperature controller, or use two sets of AW-TH330A. Features: Plug-n-play controller with no wiring requirement Display in Celsius or Fahrenheit degree 15A power output rating (total of both channels) Robust humidity sensor designed for high relative humidity (>85%RH) environment Anti-short feature to protect compressor based cooler/dehumidifier Easy to configure Wi-Fi connection Higher precision ON/OFF control thanks to the adjustable hysteresis band and precision sensor. WIFI Features 1) Remote access Using the AuberWIFI app, you are able to check/change the temperature/humidity set points and all the parameters at any time from anywhere, as long as you are connected to a cellular or WIFI internet. You will be able to monitor the device when you are not at home, doing grocery shopping, or traveling in another city. Note: AW-TH330A uses the Auber's 2nd Gen WIFI chip, which has better router compatibility (including mesh router) and it has push notification features. 2) Easy to view and analyze performance Our app offers graphic plots to show the temperature and humidity data over the time. You can also export the data to a CSV file for further analysis. 3) User-friendly interface Setting up control parameters through your smartphone is an easier and quicker alternative than the traditional keypad. Through the keypad and two-line display, you may need to refer to its manual to recheck the parameters from time to time again. But with the innovative AuberWIFI app, the function and setting range of each parameter will be denoted on the screen to save the hassle of maneuvering the device. 4) An integrated solution The AuberWIFI app gives the user a sense that their phones are integrated as a part of their controller. The system has more functions and is easier to operate. Moreover, you can manage multiple devices from the Auber WIFI Device family just with a few clicks. Instead of using one app for only one device model, our smart phone app acts as the central control hub for different types of AuberWIFI devices, giving you a better user experience than web based interfaces of other Wi-Fi enabled devices. This controller can be used in high relative humidity (>85%) and condensing environments, which are among the most challenging conditions for humidity controllers. For example, when controlling the humidity of a curing fridge at temperatures below the dew point of the ambient environment, opening the fridge door will cause water to condense onto the sensor. Also, when controlling the humidity at a humidity level that is close to 100%, slight temperature drop may cause condensation on the sensor. As a result, this will usually lead to unstable readings on humidity sensors while also potentially damaging the sensor. The AW-TH330A, however, is equipped with the utmost robust sensor available on the market that is able to withstand such situations. Exclusive Functions New humidity control parameters are introduced to limit the humidity output. In controlling curing chambers, there typically is a significant decrease in relative humidity whenever the compressor is running, or a large increase when the chamber door is opened. Humidity controllers on the market typically enable the humidity output immediately, which will create a big reading swing. However, with new humidity controller parameters in this controller, users are able to limit the humidity output to reduce reading swings. These parameters can be accessed directly through the controller’s keypad. Specifications Temperature Control Range -40 ~ 80°C, -40 ~ 176°F Temperature Resolution 0.1°C (between -9.9 ~ 80°C); 1°C (between -40 ~ -10°C); 0.1°F (between -9.9 ~ 99.9°F ); 1°F (between -40 ~ -10°F, 100 ~176°F) Temperature Accuracy 0.5 °C Temperature Control Mode On/Off Control. Heating or Cooling Humidity Control Range 0 ~ 99.9%RH Humidity Resolution 0.1%RH Humidity Accuracy 3%RH Humidity Control Mode On/Off Control. Humidifying or Dehumidifying Controller Output Rating 15A, 120V or 240V AC (Total of both temp and humidity channels) Operating Temperature 0~50 °C Dimension 91x140x46mm Input Power 85 ~242VAC, 50Hz/60Hz Sensor Cable Length 6ft (2m) Power Cable Length 3ft (1m) TH330A AW-TH330A HD330 AW-HD330 Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.1 out of 5 stars 23 4.8 out of 5 stars 8 4.0 out of 5 stars 1 5.0 out of 5 stars 1 Price $129.99$129.99 $169.99$169.99 $129.99$129.99 $169.99$169.99 Output Mode Temp & Humidity Control Temp & Humidity Control Dual Channel Humidity Dual Channel Humidity WIFI Function no data ✓ no data ✓